
The actual gas quantity of the gas flow meter GD 300 (Ex) / GD 500 (Ex) is calculated by the 1-channel flow computer GDR 1530.
The actual gas quantity of the gas flow meter GD 300 (Ex) / GD 500 (Ex) is calculated by the 1-channel flow computer GDR 1530.
The 1-channel flow computer GDR 1540 is used to calculate the current gas volume of gas flow meters which can be connected via an open-collector/reed
Fluidistor – Gas Flowmeter – Overview
The Fluidistor gas flow meter GD 300 Ex / GD 500 Ex is used for gas volume measurements and for technical and medical gases. The
FLUIDISTOR – GAS FLOWMETER GD 300 EX WITH intermediate flange / WAFER
Installation length of 65 mm easy replacement of 99 % built-in flowmetersSimple and space-saving installation between ISO and ASME flange Oscillating measurement principle, without moving
FLUIDISTOR – GAS Flowmeter GD 300 EX – Flange (ISO or ASME)
The GD 300 (Ex) is available as standard from the nominal sizes DN 40 to DN 400 *. The following types of flange are available:
FLUIDISTOR – Gas Flowmeter GD 500 EX – external pipe thread
The GD 500 Ex is used for small nominal sizes (DN 15 – DN 25) and low flow rates. Oscillating measuring principle without moving parts
TR 1703 – Incremental Buffer Stage
TR 1703 The Buffer Stage TR 1703 serves as the galvanic separation of incremental impulses (0 – 200 KHz) and their bypass into different installation
Solid shaft – Hollow shaft rotary encoder OPTI – HTP – HTPI
TYPE OPTI 96/121 Ester’s solid shaft, hollow-shaft rotary encoders are based on a uniform technology with a metal disc and multiple scanning unit. They are
FMP 1836 – Frequency Transducer
The 2 channel frequency transducer FMP 1836 displays all measurands which can be converted to the equivalent paramenter frequency by applicable transmitters. Der FMP 1836
Speed sensors for measuring and controlling are impulse transmitters for physical input quantity rotational speed, velocity and distance in connection with a gear wheel or
Together with an impulse sensor the pole wheel is used for measured data aquisition.It consists of ferromagnetic material. The dimensions of the teeth are defined
Programmable Controller Shimaden FP 23 A
The FP 23 precision programmable controller (front frame 96 x
Programmable Controller Shimaden FP 93
The programmable controller Shimaden FP 93 (front frame 96 x
Digital Controller Shimaden MR 13
The 3-channel program controller Shimaden MR 13 (front frame 96
Process Indicator – 2 step controller PMO 5005
The 4-decade process indicator PMO 5005 S4 G2 (front frame
Digital Controller Shimaden SR 80
The MPU-based auto-tuningPID digital controllers of the Shimaden SR 80
Microchip Technology: PIC24FJ64GA002T-I/SS
PIC series Microcontroller IC 16-Bit 32MHz 64KB (22K x 24)
Silicon Laboratories: SI8441BB-C-ISR (Si8641BB-B-IS)
Digital Isolators 2.5 kV 3 forward & 1 reverse 4-channel
Very Low Power CMOS SRAM BS616LV8017EIG-55Speicherkonfiguration: 512K x 16 bitMounting
MOSFET SOT-223 P-CH ENHANCEMounting Style: SMD/SMTPackage/Case: SOT-223-4Packaging: Reel à 2500
Translation – Voltage Levels +/-15kV ESD-Protected, 1 uA, 16Mbps, Dual/Quad
Nexperia: 74HC1G00GW / Philips: 74HCT1G00GW
Logic Gates SINGL 2-IN NAND GATE PICOGATEMounting Style: SMD/SMTPackage/Case: TSSOP-5Packaging:
NXP Semiconductors: 74HC00DB (CMOS)
Logic Gates QUAD 2-INPUT NAND GATEMounting Style: SMD/SMTPackage/Case: SSOP14 (SOT337-1)Packaging:
Counter Shift Registers 8-BIT SHIFT REGISTERMounting Style: SMD/SMTPackage/Case: SSOP-16Packaging: Cut
Texas Instruments: LP2951CMX-3.3/NOPB
LDO Spannungs-Regulator 100-mA, 30-V, low-dropout voltage regulator with power good
Counter Shift Registers 8-BIT SHIFT REG W/INPUT LATCHMontage: SMD/SMTPackage/Case: SSOP-16Packaging:
Voltage References SOT23, Low-Cost, Low-Dropout, 3-Terminal Voltage ReferencesMounting Style: SMD/SMTPackage/Case:
RS-422/RS-485 Interface IC 1.6 uA, RS-485/RS-422, Half Duplex, Differential Transceiver
Texas Instruments: TLV2231CBDVR
Operational Amplifiers – Op Amps Single LinCMOS R/RMounting Style: SMD/SMTPackage/Case:
Texas Instruments: TPS3620-33DGKT
Supervisory Circuits 3.3-V Battery-Backup for RAM RetentionMounting Style: SMD/SMTPackage/Case:: VSSOP-8Packaging:
Samtec: Board to Board & Mezzanine Connectors CLM-105-02-F-D-P
10 Positionen, 1.00 mm RasterContact Finish – Mating: GoldKontakttyp: Female
SuperCap Superkondensator SuperCap FC0V474ZFTBR24 Manufacturer: NEC TOKIN Capacitance: 0.47FVoltage Rating
2 Digital-Isolator, 2.5 kVrms 4.5 mA, SOIC 8-PinMounting Style: SMD/SMTPackage
Do you have one ore more questions?
We are happy to answer your questions about our products, services or about our company in general.
Do not hesitate and send us an e-mail!
Link to our private policy!